Main Features

Size Lineup

Four sizes to match all requirements.

Enhanced performance

Max. cutting force 4.41N (450gf) and Max. cutting speed 1000mm/s

With maximum cutting force 4.41N (450gf) and maximum cutting speed 1000 mm/s (*1), it enable to cut various media with high productivity.
(*1) CE7000-130 / CE7000-160

Cutting performance that guaranties accurate 5m length cutting. (*2)

The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevent media floating.
In addition, by using an optional special basket, stability in long cuts can be achieved.
(*2) In case that using optional baskets of CE7000-60/130/160 and cutting media and conditions specified by Graphtec.

Data output via USB flash memory without PC

When cutting data designed with Cutting Master 5 or Graphtec Studio 2 are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.
* The USB memory format only supports FAT32.
　Please note that NTFS and exFAT are not supported.

Perforation cutting ability

Carrier Sheet Table

It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet.
* Available with CE7000-40 / -60.
* In case that using carrier sheet “CR09300-A3”, Please use together with carrier sheet table "OPH-A45".

User-friendly control panel

3.7 inch LCD display and
easy-to-use control panel supports 10 languages.

Improved ARMS for high precision cutting (ARMS 8.0)

The Advanced Registration Mark Sensing system delivers precise Print & Cut results by using sensors to detect registration marks and perform axis alignment. Countless efficiency boosting features improve productivity for Print & Cut applications such as stickers and decals.

Data Link Function
(Barcode Data Management/Continuous Cutting)

By reading the Graphtec original Barcode, CE7000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.
* The USB flash memory format only supports FAT32.
　Please note that NTFS and exFAT are not supported.

Continuous Cut
(Data Link function)

Barcode data management allows cutting different data sequentially by detecting the "Start Mark" of the new Barcode. Sequential Print & Cut process with roll-media is now available.

Supports colored marks / specialty media

A wide variety of media types including holographic paper and reflective sheets are now compatible due to improvements of the ARMS sensor algorithm.
* Sensor may not be able to read certain combinations of specialty media and colored marks.
* This photo is an image of FC9000.

Supports Adobe Illustrator "Crop Marks"

Using the plug-in software Cutting Master 5, Adobe Illustrator crop marks will be available.

Expanded Cutting Area

The expanded cutting area to include objects outside of the area enclosed by registration marks. Production efficiency is enhanced by reducing media waste.

For more information on "ARMS"

There are convenience functions of ARMS in the CE7000 series.
Show Details