Four sizes to match all requirements.
1485mm/s maximum cutting speed, 39.2m/s2 maximum acceleration, 5.88N (600gf) maximum cutting force. The FC9000 Series offers best in class productivity and abilities with a wider range of medias from thick to thin.
It supports long-length, 15m (50ft) (Operated with Graphtec specified media and conditions.) and makes possible to cut large signs/pops with stable paper carriage and high accurate cutting quality. In addition, if Automatic Take-up Roller as option is equipped to plotter, it becomes possible to automatically wind media and improve your work efficiency.
The media is detected by the ultrasonic sensor and rolled up automatically.
・Corresponding Models: FC9000-140/160
・Guaranteed accuracy length: 20m（Under 1.2m per job)
・Maximum diameter of winding roll: φ180mm
* Winding conditions:
- End face of roll media and end face of paper tube should be aligned.
- Width of roll media should be the same as width of paper tube at winding side.
* It cannot be winded if media is folded or overlapped inside the basket.
To prevent skew of long-length cutting, this function makes possible to automatically split long-length jobs into
smaller pages that are cut sequentially.
It shortens feed length and enables stable cutting.It is useful for cutting with higher accuracy or beyond guaranteed long length.
When cutting data designed with Cutting Master 4 or Graphtec Pro Studio / Plus are saved to USB flash memory, they can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.
3.7inch LCD display and
easy-to-use control panel supports 10 languages.
The Advanced Registration Mark Sensing system delivers precise Print & Cut results by using sensors to detect registration marks and perform axis alignment. Countless efficiency boosting features improve productivity for print & cut applications such as stickers and decals.
By reading Graphtec original barcode, FC9000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.
Barcode data management allows cutting different data sequentially by detecting the "Start Mark" of the new type of barcode. Sequential P&C process with roll-media is now available.
A wide variety of media types including holographic paper and reflective sheets are now compatible due to improvements of the ARMS sensor algorithm.
* Sensor may not be able to read certain combinations of specialty media and colored marks.
Using the plug-in software Cutting Master 4, Adobe Illustrator crop marks will be availble.
It expands the cutting area to include objects outside of the area enclosed by registration marks. Production eficiency is enhanced by reducing media waste.
This function has been implemented in addition to the current X-axis Direction Segment Area Compensation. Middle mark is now available not only for X but also Y-axis allignment.
There are convenience functions of ARMS in the FC9000 series.