Cutting Plotters : Software & Drivers

Support > Software & Drivers

Cutting Plotters

Software & Drivers

Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio

* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE7000-130AP, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.

Drivers

Cutting Plotters	Windows Driver
Cutting Plotters	Windows 7 (32-bits Edition)	Windows 8.1 (32-bits Edition)	Windows 10 (32-bits Edition)	Windows 7 (64-bits Edition)	Windows 8.1 (64-bits Edition)	Windows 10 (64-bits Edition)	Cprrespon- ding model
CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO	OPS662 (v3.80)	OPS662 (v4.00)		OPS662 (v3.80)	OPS662 (v4.00)		CE6000
CE6000-120AP	OPS628 (v10.20)	OPS628 (v10.30)		OPS628 (v10.20)	OPS628 (v10.30)		CE6000
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160	OPS662 (v3.80)	OPS662 (v4.00)		OPS662 (v3.80)	OPS662 (v4.00)		FC8600
FC2250-60 FC2250-120 FC2250-180							FC2250
FC4500-50 FC4510-60 FC4550-50							FC4500
CE2000-60 CE2000-120	OPS628 (v10.20)	N/A		OPS628 (v10.20)	N/A		CE2000
CE2000-120AP							CE2000
CE3000-40 CE3000-60 CE3000-120							CE3000
CE3000-120AP							CE3000
CE3000Mk2-60 CE3000Mk2-120	OPS662 (v3.00)	N/A		OPS662 (v3.00)	N/A		CE3000Mk2
CE5000-60 CE5000-120	OPS662 (v3.00)			OPS662 (v3.00)			CE5000
CE5000-120AP	OPS628 (v10.20)			OPS628 (v10.20)			CE5000
FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX	OPS628 (v10.20)	N/A		OPS628 (v10.20)	N/A		FC2230
FC2240-60 FC2240-120 FC2240-180	OPS662 (v3.00)		N/A	OPS662 (v3.00)		N/A	FC2240
FC3600-120	OPS628 (v10.20)	N/A		OPS628 (v10.20)	N/A		FC3600
FC4200-50 FC4200-60 FC4210-60	OPS628 (v10.20)		N/A	OPS628 (v10.20)		N/A	FC4200
FC5100-75 FC5100-100 FC5100-130 FC5100-150	OPS628 (v10.20)	N/A		OPS628 (v10.20)	N/A		FC5100
FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150	OPS628 (v10.20)	N/A		OPS628 (v10.20)	N/A		FC5100
FC7000-75 FC7000-100 FC7000-130 FC7000-160	OPS662 (v3.00)		N/A	OPS662 (v3.00)		N/A	FC7000
FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160	OPS662 (v3.00)		N/A	OPS662 (v3.00)		N/A	FC7000
FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160	OPS662 (v3.00)			OPS662 (v3.00)			FC8000
FC612-09	OPS628 (v10.20)	N/A		OPS628 (v10.20)	N/A		FC612

Notes/Explanations:

1.: On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.: On driver and software, the language is in English.
3.: On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.

To Top

Softwares

Cutting Plotters	Cutting Plotter Controller		ROBO Master Pro		D-Cut Master
Cutting Plotters	Windows 7 / 8.1 (32 & 64-bits Edition)	Windows 10 (32 & 64-bits Edition)	Windows 7 (32 & 64-bits Edition)	Windows 8.1 / 10 (32 & 64-bits Edition)	Windows 7 (32 & 64-bits Edition)	Windows 8.1 / 10 (32 & 64-bits Edition)
CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO	OPS676 (v1.40B)		N/A		N/A
CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO	Firmware version 1.60 is required (CE6000 Firmware v2.61) Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01)
CE6000-120AP	N/A		N/A		N/A
CE6000-120AP	Firmware version v1.50 is required (CE6000-120AP Firmware v2.00) User manual for CE6000-120AP (CE6000AP-UM-152-01)
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160	OPS675 (v1.50B)		N/A		N/A
FC2250-60 FC2250-120 FC2250-180	N/A		N/A		OPS639 (v2.12)	N/A
FC4500-50 FC4510-60 FC4550-50	N/A		N/A		OPS639 (v2.12)	N/A
CE2000-60 CE2000-120	N/A		N/A		N/A
CE2000-120AP	N/A		N/A		N/A
CE3000-40 CE3000-60 CE3000-120	N/A		N/A		N/A
CE3000-120AP	N/A		N/A		N/A
CE3000Mk2-60 CE3000Mk2-120	N/A		N/A		N/A
CE5000-60 CE5000-120	OPS664 (v2.20B)		OPS661 (v4.60)	N/A	N/A
CE5000-120AP	N/A		N/A		N/A
FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX	N/A		N/A		OPS639 (v2.12)	N/A
FC2240-60 FC2240-120 FC2240-180	N/A		N/A		OPS639 (v2.12)	N/A
FC3600-120	N/A		N/A		N/A
FC4200-50 FC4200-60 FC4210-60	N/A		N/A		OPS639 (v2.12)	N/A
FC5100-75 FC5100-100 FC5100-130 FC5100-150	N/A		N/A		N/A
FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150	N/A		N/A		N/A
FC7000-75 FC7000-100 FC7000-130 FC7000-160	OPS664 (v2.20B)	N/A	N/A		N/A
FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160	OPS664 (v2.20B)	N/A	N/A		N/A
FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160	OPS675 (v1.50B)		N/A		N/A
FC612-09	N/A		N/A		OPS639 (v2.12)	N/A

Notes/Explanations:

1.: On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.: On driver and software, the language is in English.
3.: On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
4.: On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.

To Top

Softwares

Cutting Plotters	Cutting Master 4		Graphtec Pro Studio
Cutting Plotters	Windows 7 / 8.1 / 10 (32 & 64-bits Edition)	Macintosh OS10.7 - 10.15	Windows 7 / 8.1 / 10 (32 & 64-bits Edition)
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160	Cutting Master 4 for Windows	Cutting Master 4 for Macintosh	Graphtec Pro Studio for Windows
FC4500-50 FC4510-60 FC4550-50	Cutting Master 4 for Windows	Cutting Master 4 for Macintosh	Graphtec Pro Studio for Windows

Cutting Plotters	Cutting Master 2			Cutting Master 3		Graphtec Studio
Cutting Plotters	Windows 7/ 8.1 (32 & 64-bits Edition)	Windows 10 (32 & 64-bits Edition)	Macintosh OS10.4 - 10.10	Windows 7/ 8.1/ 10 (32 & 64-bits Edition)	Macintosh OS10.5 -10.11 macOS 10.12	Windows 7/ 8.1/ 10 (32 & 64-bits Edition)	Macintosh OS10.6 -10.15
CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Cutting Master 3 for Windows	Cutting Master 3 for Macintosh	Graphtec Studio for Windows	Graphtec Studio for Macintosh
CE6000-120AP	N/A			N/A		N/A
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Cutting Master 3 for Windows	Cutting Master 3 for Macintosh	Graphtec Studio for Windows	Graphtec Studio for Macintosh
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Firmware version 2.10 or later is required (FC8600 Firmware v3.10)
FC2250-60 FC2250-120 FC2250-180	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Cutting Master 3 for Windows	Cutting Master 3 for Macintosh	Graphtec Studio for Windows	Graphtec Studio for Macintosh
FC2250-60 FC2250-120 FC2250-180	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Firmware version 3.90 or later is required (FC2250 Firmware v4.50)
FC4500-50 FC4510-60 FC4550-50	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Cutting Master 3 for Windows	Cutting Master 3 for Macintosh	Graphtec Studio for Windows	Graphtec Studio for Macintosh
FC4500-50 FC4510-60 FC4550-50	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Firmware version 1.92 or later is required (FC4500 Firmware v2.70)
CE2000-60 CE2000-120	N/A			N/A		N/A
CE2000-120AP	N/A			N/A		N/A
CE3000-40 CE3000-60 CE3000-120	N/A			N/A		N/A
CE3000-120AP	N/A			N/A		N/A
CE3000Mk2-60 CE3000Mk2-120	N/A			N/A		N/A
CE5000-60 CE5000-120	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Cutting Master 3 for Windows	Cutting Master 3 for Macintosh	Graphtec Studio for Windows>	Graphtec Studio for Macintosh
CE5000-60 CE5000-120	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00) When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40)
CE5000-120AP	N/A			N/A		N/A
FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX	N/A			N/A		N/A
FC2240-60 FC2240-120 FC2240-180	N/A			N/A		N/A
FC3600-120	N/A			N/A		N/A
FC4200-50 FC4200-60 FC4210-60	N/A			N/A		N/A
FC5100-75 FC5100-100 FC5100-130 FC5100-150	N/A			N/A		N/A
FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150	N/A			N/A		N/A
FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Cutting Master 3 for Windows	Cutting Master 3 for Macintosh	Graphtec Studio for Windows	Graphtec Studio for Macintosh
FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160	C-Master2(W) (v2.00)	TBD	C-Master2(M) (v1.99)	Firmware version 3.10 or later is required (FC8000 Firmware v3.50)
FC612-09	N/A			N/A		N/A

Notes/Explanations:

1.: On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.: On driver and software, the language is in English.
3.: On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
4.: On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
5.: In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.

To Top