Firmware for CE8000-130AP download

Software License Agreement

It is required to review the following license agreement before the software is downloaded. We will be deemed that the customer has to agree to the terms and conditions of the license agreement when the software had been downloaded by the customer. Please note that it is not possible to download or use the software if the customer does not agree to it.

Downloading Files

Ver.1.04 (Latest version)

Date of updated	02 Oct, 2024
Supported Products	CE8000-130AP
Supported OS	Windows 11 / 10
Downloading files	Software	CE8000AP_FU(v104).zip (3,555KB)

• The plotter driver is required to be installed for use.
• Please update the firmware according to the instructions to start cutting plotter properly.

Revision History

Ver.1.04

1. Fixed the problem that the WLAN MODULE ERROR would occur if the cut data size is large when using WLAN.
2. Updated not to overwrite the error message “WLAN MODULE ERROR” with the other errors.

Ver.1.03

1. Fixed the problem that a value in inches exceed the maximum value in expand settings.
2. Fixed the problem that the display could not be operated when sending a command continuously via wireless LAN.
3. Fixed the problem that cutting motion starts again when stopping the job and clearing the buffer under wireless LAN connection.
4. Fixed the problem that [QUIT COPY] could not be selected when copying with [MEDIA CHANGE MODE] turned ON.
5. Revised the Spanish text on the IP address setting menu.