Thermal Printer DP-581H

Limited stock

Features

Connection with the GL unit

The printer can be connected with GL240 or GL840 series wirelessly.
- (Optional WLAN module (B-568) is required on GL240 or GL840 series.)
The printer can be connected to the GL980 or GL2000 with USB or LAN cable.

Connect Thermal Printer via USB cable !

Supports built-in battery

It allows to print data without AC power by driven with built-in rechargeable battery, enables to use anywhere.

Lithium-ion battery (6-cell, 11.1 V, 6000 mAh, 66.6 Wh)
Driving time: Approx. 150 meters of printing at full charge (continuous printing at 5 mm/s with a low printing rate)
- When it is used with slower feed speed or longer standby time, the printable length becomes shorter
Feeding speed: Up to 5 mm/s when using the battery pack
- The battery pack or AC adapter is automatically selected, AC adapter has priority. It is not switched while data is being printed.

Wider printing area

It is large type portable printer using 210 mm wide paper, it enables to print waveform with a width of 200mm.

Direct printing with useful functions

Real-time Printouts

Print data in waveform (Y-T timestamp chart)
Synchronous or asynchronous with the trigger

Print Recorded Data Post Process

Print all saved data or selected data within cursors in waveform

Print Selected Digital Data Values

Print data in digital values of selected data using cursor up to 1000 samples

Real-time Printout with Digital Values

Print data in digital values
Synchronous or asynchronous with the trigger
For GL240 and GL840 Series only

Stacked Bar Chart Printing

Print accumulated data displayed on the GL unit
For GL240 and GL840 Series with GS sensor only

X-Y Format Printing

Print data displayed in X-Y diagram on the GL
For GL980 and GL2000 only

Supported GL series and communication methods

Scrollable

Model	GL240	GL840-M/WV	GL980	GL2000
USB connection	–	–	Yes	Yes
LAN cable connection (*1)	–	Yes ^(*1)	Yes ^(*1)	Yes ^(*1)
WLAN connection (Required B-568)	Yes ^(*1)	Yes ^(*1)	–	–

When using LAN cable connection, WLAN access point is required, and the printer may not be able to satisfy its specifications due to the radio wave condition.

This printer unit is made by the DASCOM and configured for Graphtec GL series.
Available regions for this product are limited in order to comply with local wireless communications laws.

Main unit specifications

Scrollable

Item		Description
Model name		DP-581H
Printing method		Thermal printing system using thermal paper
Print resolution		8 dots/mm in width and feed direction
Paper feed accuracy		±2% ±0.5 mm
Print width		210 mm
Recording paper roll length		30 m
Print head lifetime		Approx. 30 km (in print density 12.5 %)
Operation panel	Key	Power, Paper feed
Operation panel	Display	Status LED (Power, Battery, Alert) Status is indicated by combinations of three LEDs turning on/blinking/turning off.
Interface	Type	USB2.0 (Type-C), Wireless LAN (IEEE 802.11 b/g/n)
Interface	Network function	Web server function (for printer unit condition setting), DHCP client function
Supported models		GL2000, GL980, GL840, GL240 * GL2000, GL980: Connect with USB or LAN cable ^(1) GL840: Connect with LAN cable ^(1) or WLAN ^(2) * GL240: Connect with WLAN ^(*2)
Operating environment		5 to 35 ºC, 30 to 80 %RH (No condensation)
Power source ^(*3)	AC Adapter	100 to 240 V AC, 50/60 Hz
Power source ^(*3)	Battery pack	Rechargeable lithium-ion battery (6-cell, 11.1 V, 6000 mAh, 66.6 Wh)
Battery ^(*3)	Charging	Charge using the main printer unit
	Battery level	Indicates low power warning with LED
	Driving time (typical)	Approx 150 meters at full charge in continuous printing at 5 mm/s with a low printing rate
External dimensions		Approx. 312 [W] x 109 [D] x 66 [H] mm (excluding protrusions)
Weight		Approx. 2.0 kg (including battery pack and excluding AC adapter)
Corresponding standards		CE mark, RoHS

WLAN access point is required. GL unit is connected to access point by LAN cable and printer is connected to access point wirelessly.
When wireless LAN on GL unit is set to access point mode, connect either printer or the GL100-WL. Both cannot be connected at the same time.
When AC adapter and battery are connected to printer, it is automatically selected and AC adapter has priority.
It is not switched while data is being printed.
When it is used with slow feed speed or with long standby time, the driving time (printable length) becomes short.

Printer function

Scrollable

Item		Description
Print mode	Y-T format in real time	Prints data in waveform in real time while GL unit is recording in Y-T display mode • Synchronous or asynchronous with the trigger
	Y-T format in replay	Prints data in waveform while data is being replayed on the GL unit in Y-T display mode • All data or data in the area specified by cursors * Not supported during 2 screen replay
	Logging data in real time ^(*4)	Prints data in digital value in real time while GL unit is recording in digital display • Synchronous or asynchronous with the trigger
	Digital data in replay	Prints data in digital data while data is being replayed on the GL unit in Y-T display mode • Option to print data in the area specified by cursors (Up to 1000 data points)
	X-Y format printing	Prints the XY graph when displaying data in X-Y format on the GL unit. (For GL980 and GL2000 only)
	Bar graph printing ^(4)(5)	Prints accumulated data graph displayed on the stacked bar graph on the GL unit
Y-T format	Feed speed ^(*6)	1, 2, 5, 10, 20, 25 mm/s, 1, 2, 5, 10, 20, 25, 30, 50, 100 mm/min, 1, 2, 5, 10, 20, 25, 30, 50, 100 mm/h, 10, 20 mm/day and external signal synchronization • Function to set feed speed close to the screen TIME/DIV setting of GL unit. * Does not automatically sync with TIME/DIV setting on the GL unit. 　Effective feed speed range depends on the sampling setting of the GL unit.
	Print format	200 mm x 1 (* Multi-zone printing is not available.)
	Zone function	Trace position on printing is the same as the setting of the GL unit. * One DIV grid on the GL unit corresponds to two DIV grids on printed paper.
	Grid printing	Off, 5 mm, 10mm Fine/Coarse
	Span/Position	Size and position of trace on printing are dependent on the setting of the GL unit
	Annotation ^(7)(8)	Prints the information set on the GL unit Title field: Date, time, feed speed, system annotations Channel field: Ch Annotation, AMP setting, data value * Other texts can be added using flying annotation.
	Channel mark	Prints channel number
	Distance mark	Prints the accumulated value from the start point every 50 mm ^(*9)
	Timing marker	Off, 1, 10 sec, 1, 10 min, 1, 10 hrs ^(*9)
	Alarm printing	Prints the mark at point where the alarm occurred * Prints perpendicular to feed direction.
	Envelope mode	Prints only an envelope of waveform
	Trigger mark	Prints the mark at point where the trigger occurred
	Scale printing	Prints scale value of channel ^(7)(8)
Logging printing ^(4)(7)(*8)		Prints data with digital format * Sampling is limited to 1 second or slower.
XY printing		Prints waveform by copying the screen of the GL unit
Screen copy	Function	Prints image of screen displayed on the GL unit
	Tone	Color lines on screen of the GL unit are converted to grayscale by dither system
	Waveform area	Background color is the same as screen setting of the GL unit
List printout		Prints condition settings of the GL unit
External signal synchronous feed function		Synchronizes paper feed speed with an external signal inputting to the GL unit * The external signal input to GL is adapted to one of external sampling, external trigger, 　synchronous paper feed.

Available when using GL240 or GL840.
Available when using GL240 or GL840 with GS sensor and displaying data with bar graph.
When the GL240 or GL840 is connected, maximum feed speed is 10 mm/s even if printer is driven by AC adapter. When printer is driven with the battery pack, max feed speed is 5 mm/s for all GL series connection.
Characters that can be printed are limited to alphabets (A-Z, a-z), numbers (0-9) and symbols that can be set on the GL unit. Double-byte characters such as Chinese, Japanese are not supported. When double-byte code is entered, it is printed by square mark.
When using GL840, up to 10 channels can be printed at the same time.
Select to print the timing mark or the distance mark.

Dimensions

Scale ：mm
Tolerance : +/- 5 mm

Standard accessories

Battery pack, 1 pc
AC adapter (100-240 V), 1 pc
AC power cord, 1 pc
USB cable (length 1.5m), 1 pc
Recording paper (Roll), 1 roll
Quick start guide, 1 pc
Setup guide, 1 pc
CD-ROM, 1 pc

Supplies

Item	Model name	Description	Package
Recording paper	PR-210X30	Thermal paper, 210 mm (W) x 30 m (L)	6 rolls/box
Battery pack (Limited stock)	BAT-581H	Rechargeable lithium-ion battery (11.1 V, 6000 mAh)	1 pc/box